E-Globaledge Coporation

Home > Solutions > Optoelectronics & Semiconductor > LED / Optical Communication > Wire Bonding Process

Wire Bonding Process [Four Technos]


Automatic Wire Bonder
Model:SWB-2500

Features

  • Flexible for various bonding requirements
  • Wire bond at different heights or angles

General

Four Technos Co., Ltd. is a leading company of Bonding system for Optical device in Japan.
Their experience of Full-automatic system is user friendly and highly appreciated by domestic & overseas user.

SWB FT-2500 Gold Wire Bonding system

  • Developed especially for optical device
  • Capable to accomodate various requirements, and suitable for the mass production
  • Maximum 3mm height difference wiring is possible
  • Capable to set 0° to 90゜ for 1st surface and 2nd surface
  • Simple replacement of bonding, working tools
  • Capable to focus to each 1st and 2st point
Specification
Bonding method Ultra-sonic thermalcompression
Total bonding accuracy ±5μ(With 4T's standard sample)
Bonding speed Flat area 0.3s/2mm(with roop control) Depends on device
Different height bonding (3mm) 0.5s/2mm(with roop control) Depends on device
Bonding wire length 7mm Depens on device
Controlled resolution XY-table:1.0μm Z1-axis:1.0μm Z2-axis:1.0μm
Heating method Temperature controlled cartridge heater
Heating temperature Ambient to 300℃ (Celsius)
Recognition method Recognition method Multiple correration method
Detection speed Within 0.3s/2points correction (including travel time)
Recognition range 1/3inch CCD 0.9mm X 1.2mm(in the case of X4 lens)
Maximum bonding area Max. X:40mm Max. Y:40mm
Wire diameter Gold wire φ20μ~38μm 2inch double side flange spool
Number of bonding wire Maximum 256wires 1kind
Registered work varieties 20 kinds (Depends on registered recognision pattern)
Header supply method 4T's original tray 2inch, 4inch tray (Option)
Header feeding tray Side by side lay-out for small production or stackable magazines for mass production
Bonding tool
(Designed according to specifications)
Flat vacuum collet
U-shaped vacuum collet
Mechanical chucking collet
The other type of collet
Accessary Input power AC220V,AC200V,AC110V,AC100V 50/60Hz
Power consumption 10A approx.(AC100V))
Compressed air 500kPa(5kgf/c㎡)10l/min
N2 300kPa(3kgf/c㎡)30l/min
Vacuum Supplied with vacuum pump (Accessary)
Dimension 1600mm(W) x 1100mm(D) x 1900mm(H) approx. (excluding signal tower)
Weight 800Kg approx.
  • Inquiry concerning this page

TOP

Page NO:ESO-C013

Recommended environment
【Windows】Internet Explorer 6.0, Firefox 2.0【Macintosh】Firefox 2.0, Safari 2.0